Select Ribbon Mixer based on daily production. Because each batch of materials per batch of materials is about 10 minutes, and the time for materials and feed, each batch of materials can be calculated in 15 minutes, and 4 batches of materials can be processed continuously in 1 hour. If you choose a mixer of 100 kg per batch, 400 kg can be processed per hour. Users can choose a horizontal Ribbon Mixer according to their needs.
How to use Ribbon Mixer?
According to the working principle of the horizontal Ribbon Mixer, the ability to push the material in the opposite direction should be basically the same. Because the spiral band of the internal spiral band should be less than the external spiral band, in order to achieve the consistency of the push material, the spiral band spiral distance should be less than the external spiral belt, and the width should be greater than the external spiral belt, otherwise the material will concentrate in one direction. Therefore, pay attention to this when choosing a horizontal hybrid.
Due to the different friction coefficients of shattered particle size and material, the materials of various components can participate in the mixed time, resulting in the unevenness of the product. It has been realized and improved the product. One is to pay attention to the processing accuracy to reduce the bottom gap to about 3 mm
When choosing a horizontal Ribbon Mixer, you should pay attention to the method of raising. You should communicate with the supplier in time to choose a valve form that is suitable for your own craftsmanship, and do not choose the form of the side port. The reason is that when the mixer is mixed at the specified time, it can be cleared at once in a short time to ensure the uniformity of the material; if the spiral band of the side port is gradually cleaned, the first is to delay the time and reach the expected productivity. The material book has reached the best degree of uniformity. Excessive stirring will cause the material to distinguish the material and destroy the uniformity, thereby losing the significance of using a horizontal mixed machine.Use the horizontal Ribbon Mixer to pay attention to the order of the feeding. Generally, it is to cast large ingredients, such as corn flour, soybean meal powder, etc., and then submit the group to divide, such as premix. Note that premix must not use a spiral increase, apply disposable rollover feed, or use artificially feeding, so as to avoid the loss of the out -of -analysis of the effective ingredients in the premix.
Using a horizontal Ribbon Mixer, it should be applied in batches after the mixed machine is started. Do not stop when the mixing is erected, and then mix a batch after the net is out. If it starts after full load, the motor will be burned too much after full load.
